Low-intensity omnidirectional lights
Low-intensity lights are intended for use as a part of the lighting systems (LS) on landing grounds as approach and crossbar lights,
runway approach threshold and end lights and also for use in other functional groups in parallel powered systems.
ОВП-С-21/48-КЗ/Б User Manual
ОВП-С-21/48-К/Б Characteristics (red)
ОВП-С-21/48-З/Б Characteristics (green)
runway threshold and runway end lights (red/green)
ОВП-С-20/48-ЖП/Б User Manual
ОВП-С-20/48-Ж/Б Characteristics (yellow)
ОВП-С-20/48-П/Б Characteristics (white)
side light of the first third and the last third of the runway (white/yellow)
ОВП-С-01/48-П/Б User Manual
ОВП-С-01/48-П/Б Characteristics (white)
side light of the second third of the runway (white/white)
ОВП-С-22/48-ПН/Б User Manual
ОВП-С-22/48-ПН/Б Characteristics (white)
touchdown marking light (none/white)
ОВП-С-24/48-ЖН/Ж/М User Manual
ОВП-С-24/48-ЖН/Ж/М Characteristics (yellow)
runway guard light (none/yellow) flashing
ОВП-С-23/48-ЖН/Ж User Manual
ОВП-С-23/48-ЖН/Ж Characteristics (yellow)
runway guard light (none/yellow) not flashing
|
|
|
Aerodrome beacon.
The beacon is intended for long-range visual detection of the aerodrome and its identification in the area of strong light from the adjacent lighting systems.
Benefits:
- Low energy consumption
- High reliability of operation
- Various types of installation fixtures
- Safe power supply =48 V
- Large lifespan of the light source – over 50,000 hours
- 5 independent light sources in the beacon housing
Specifications:
- Operating temperature: from -50°С to +50°С
- Relative humidity: 98% at +25°С
- Power supply voltage = 48 V
- Average Power consumption: 25 W
- Pulse power: 500 W
- Light source – 50 LEDs
- Color – white
- Flash time is 75 ms (AC 150/5345-12F)
- Number of flashes is 25 per minute (AC 150/5345-12F)
- Designed for operation in all climate
- Ingress protection rating IP67
- Average service life is 10 years
- Warranty period is 24 months
Airport beacon ОВП-С-12/48-П/Б User manual
|
Support for LS light.
It is designed for installation of LS elements on the ground. The support is made of 50x50 mm steel angle, 750 mm long, coated with yellow powder paint.
Complete with a 400 mm high stand and LS light mounting bracket.
User manual
Support for LS light "Needle"
|
|
|
Pyramid for LS light 250 mm.
It is designed for installation of LS elements on solid basement or on the ground. This pyramid is made of polycarbonate, bulk painted in yellow (RAL1003), UV-proof paint.
To mount the lights, a bayonet lock is used, located at the top of the pyramid.
Support for LS light "Pyramid 250" User manual
|
LS pyramid base for concrete.
It is intended for installation of the pyramid on concrete. The pit is made of steel and painted with protective coating.
|
|
|
LS pyramid base for ground.
It is intended for installation of the pyramid on ground.
The pit is made of plastic with installed steel fixing angles.
|
Signal pole.
Signal pole is intended to indicate the location of the lights in winter conditions with snow drifts to facilitate their cleaning.
|
|
|
Pyramid for LS light 450 mm.
It is designed for installation of LS elements on solid basement or on the ground. This pyramid is made of ABS, bulk painted in yellow (RAL1003), UV-proof paint.
Complete with LS light mounting bracket.
|
