|
SDLC – Simple Digital Light Controller – "Simplified (one-channel) lighting digital control system".
The system is intended for adjusting brightness in one control channel depending on the outdoor lighting conditions or manual settings.
User Manual
"Digital Light Controller"
|
DLC – Digital Light Controller. The controller is intended for adjusting brightness in five independent control channels depending on received radio commands,
outdoor lighting conditions or manual settings.
The controller is equipped with CAN-Bus digital interface for external control.
User Manual
"Digital Light Controller"
|
|
|
Extension board of power line for lighting. Designed to power lighting equipment in long chains on large airfields.
User Manual "Extension board of power line for lighting"
|
FM and aeronautical band receiver. It is intended for control of the lighting systems lights brightness via an aeronautical radio station according to L-854 specification.
PCL – Pilot Controlled Light – "Digital Light Control System compliant with L-854 specification".
This system is intended for adjusting brightness of lighting in three independent control channels depending on the received radio commands.
User Manual
"FM & Aeronautical band receiver 87-137MHz with L-854 Specification"
|
|
|
Illumination sensor. It is intended for automatic switching of the lighting system brightness depending on the outdoor light conditions.
Illumination sensors
|
48 V power supply source. Intended for power supply of lighting system and controller.
48 V 480 W industrial power supply source
48 V 960 W industrial power supply source
|
|
|
Turnkey solution.
A turnkey solution provides quick installation of lighting systems at the lowest prices.
This solution includes complete and proven control cabinets ready for power supply and connection of light strings.
"Lighting system control panel" User Manual
|
Turnkey solution.
Lighting equipment control system compliant with L-854 specification in a control panel for outdoor installation complete with antenna and loudspeaker.
"L-854 control panel" User Manual
|
|
|
Turnkey solution.
Outdoor lighting control system operated in manual/automatic made depending on ambient lighting conditions.
User Manual
"LS SDLC control panel"
|
Turnkey solution.
Extension board of power line for lighting. Designed to power lighting equipment in long chains on large airfields.
User Manual "Box with extension board of power line for lighting"
|
|
|
Turnkey solution.
Lighting equipment control system operated in manual/automatic mode depending on ambient lighting conditions
via radio channel according to L-854 specification for conventional LS lights based on filament lamps.
"Lighting system control panel" User Manual
|
Signal converter.
A 4-channel brightness control signal converter of the brightness controller to convert PWM signal to 0-10 V analogue signal.
It is intended for integration of the brightness controller into a conventional control system that controls brightness of filament lamp lighting devices.
"Signal converter" User Manual
|
|
|
Custom panels for SDLC.
SDLC - Simple Digital Light Controller - "Упрощенная (одноканальная) система цифрового управления освещением" может быть поставлена на панелях, разработанных под
задачи конкретного заказчика. Панели для монтажа на щиты электропитания или непосредственно в рабочее место руководителя полетов. Разработка и изготовление таких панелей
входит в стоимость контроллеров.
|
Remote control system for airfield lights.
RC-4PWM+R - Remote control for airfield lights with 4 PWM outputs for direct connection to
power/control lines of lights and the LoRa 868 MHz radio channel for remote wireless connection to control panels.
Designed to be placed directly on the flight director’s workplace.
"Remote control" User Manual
|
|
|
Remote control reciever for airfield lights.
RC-4PWM+LoRa - remote control reciever for airfield lights with 4 PWM outputs for connection to
control lines of "Line Extender". Use the LoRa 868 MHz radio channel for remote wireless connection to control panels.
Designed to be placed directly on electrical control box.
"Remote control reciever" User Manual
|
